Multilink PPP 2
Multilink PPP (MLPPP) makes multiple parallel links act like one link from a layer 3 perspective. In this next lab, the lab begins with a working configuration that does not use MLPPP, with two...
View ArticleAnswers: MLPPP 2
This lab asks you to do a basic migration: move from using two parallel serial links as independent links to instead treating them as one layer 3 link using MLPPP. This lab requires new configuration...
View ArticleOSPFv2 Enabler #2
Time for another OSPF Enabler exercise. The idea is simple: In one exercise, you’ll get to configure about 10 different OSPFv2 network commands, with different requirements for each. Just getting in...
View ArticleOSPFv2 Enabler #2 – Answers
This latest OSPF Enabler exercise asked you to configure four routers in a two-area design. As usual, the exercise asks for different styles of OSPFv2 network commands, for no other reason than to give...
View ArticleEIGRP Enabler #2
Now for some more EIGRP work. Your job: read and react to a set of requirements to then choose how to configure about a dozen EIGRP network commands. Simple, useful, do it and move on to the next...
View ArticleEIGRP Enabler #2 – Answers
This latest EIGRP Enabler exercise asked you to configure three routers, specifically to add the EIGRP network commands. This post lists the answers – simple enough. Packet Tracer Labs: Blog posts and...
View ArticleOSPFv2 Enabler #3
In this latest OSPF Enabler exercise, you’ll configure a network of four routers with three areas. As always, the idea is simple: In one exercise, you’ll get to configure about 10 different OSPFv2...
View ArticleOSPFv2 Enabler #3 – Answers
This latest OSPF Enabler exercise asked you to configure four routers in a three-area design. As usual, the exercise asks for different styles of OSPFv2 network commands, for no other reason than to...
View ArticleEIGRP Enabler #3
The goal is to get so good at your OSPF and EIGRP network commands that you get bored with all these exercises. There yet? If not, here’s another. As always with the EIGRP and OSPF Enabler exercises,...
View ArticleEIGRP Enabler #3 – Answers
EIGRP Enabler exercise 3 asked you to configure four routers, specifically to add the EIGRP network commands. If you’ve not seen these before, check out the Routing Protocol Enabler intro post....
View Article